TM4C123GH6PM: EK-TM4C123 ICDI .bin release

Even "champs" prove reluctant to release such code. (you did not know that?)

We did enjoy your rewrite of, "Dog ate my homework." (that too takes a month to replace...)

cb1_mobile,
i know the reason but still wants to check with other.

Hello Lisa

We do not release ICDI binary outside of TI. The customer must either a new launchpad(s) or order an XDS100v2 debugger and then wire it to the existing launchpad. BTW, I have not heard a wait time of 1 month for EK-TM4C123GXL. Are you sure it is 1 month?

Re: "One month" - might that prove a (slight) exaggeration - employed to "free" the (highly sought) ICDI binary?
The (unusual) combination of U2's "demise" (unexplained) and month's "wait" may release "sorrow" - but not the ICDI binary...

Hello cb1

I agree. A digikey search "www.digikey.com/.../en shows 588 units in stock and ready to ship.

Indeed Amit - and would not any "self-respecting" branch office have (on hand) stock of these popular boards? (for just such an emergency)

Were not we told that "Aesop" penned (perhaps) superior fables?

Lisa Ding said:

They mount new TM4C123 on board and need .bin to program device to be ICDI debugger.

The LMFLASHPROGRAMMER allows the ICDI firmware to be upgraded.

If you try the ICD firmware upgrade on a new blank U2 on the EK-TM4C123GXL, I think the LMFLASHPROGRAMMER will program the ICDI firmware into the launchpad.

Hi Amit,

Customer need to go through disty because they need receipt with company ID. That's why they need to wait for one month. I told customer that we can't release .bin already. thanks for your comment

Hi Chester,
thanks for your comment. I will try this method.