• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 1298 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMDSRM48HDK: TDO mismatch error while programming CPLD - Optimized board.

Manjunathan K
Expert 2825 points
Part Number: TMDSRM48HDK

Hi,

I am facing the error while programming the CPLD in my optimized HDK board. What could be the possible problem. I need support regarding this.

Please find the image of command prompt below

  • 0
    TI__Guru 68920 points
    Hi,

    What drove you to program the CPLD and where did you get the XSVF files?

    The reason I ask is that the reference design for the XDS100v2, the files you can download on processors.wiki.ti.com/.../XDS100 have a VQFP version of the CPLD.

    The HDK uses a BGA version and it has a different set of XSVF files ... the VQFP and BGA are not compatible.
    So you might have gotten the wrong file set for the CPLD on the HDK board, unless you specifically got it from a posting or from
  • 0 in reply to Anthony F. Seely
    Expert 2825 points

    Hi, Mr.Anthony,

    I have optimized the TI RM48HDK, I got the XSVF file of VQFP package from the ti forum almost a year back when I start to optimize the RM48HDK kit. I have programmed almost  5 kits out of 7 optimized by us, which are working fine, but only one kit is showing the above error.