TMS570LS1224: Need code to interface RTC dsl1307 with TMS570LS1224 Lanchpad

Kaleeswaran Eswaran

Part Number: TMS570LS1224

Hi ,

I need code to interface rtc dsl1307 with TMS570LS1224 Lanchpad.i find difficult to get the things done.I need to interface RTC dsl1307 module using i2c.Kindly let me know the possible solution.

Thank you,

over 8 years ago

0 Chuck Davenport over 8 years ago

TI__Guru 59540 points

Hello Kaleeswaran,

Please see the duplicate post here:
e2e.ti.com/.../2113344

0 Kaleeswaran Eswaran over 8 years ago in reply to Chuck Davenport

Prodigy 185 points

Thanks, Is there is any RTC library is available for TI ? If yes kindly help me with the link.

0 Chuck Davenport over 8 years ago in reply to Kaleeswaran Eswaran

TI__Guru 59540 points

Kaleeswaran,

I am not aware of any code from TI for this purpose. Note that Hercules and the launchpads are not intended for the broad DIY market and we don't typically offer drivers beyond those for the device and its specific peripheral set. You may, however, be able to find something on third party forums or sites that support for "canned" drivers for off chip peripherals. I am pretty certain there are drivers for the Arduino board for example. An industrious engineer might be able to review the address and command sequencing used in the Arduino application to replicate it using the Hercules I2C drivers.

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS1224: Need code to interface RTC dsl1307 with TMS570LS1224 Lanchpad