• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 309 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C123BE6PM: About Revision change from 6 to 7.

Hiroyasu Tazawa1
Guru 12350 points
Part Number: TM4C123BE6PM

Hi, Everyone

I have a question about Revision7 of TM4C123.

My customer use Revision 6 devices.
and They want to cheange from Revision6 to Revision7.

I understand they should change errata MEM#10 and MEM#11 for revision change.

This understanding is correct ?

Best Regards
Hiroyasu

  • 0
    TI__Guru 72500 points

    In revision 6 of this device, the following errata apply:

    Revision 7 of the silicon fixed those problems but with some limitations. Those limitations are described in these three errata:

    The workarounds for errata MEM#07, MEM#10 and MEM#11 are usually much more practical to implement than the workarounds for errata MEM#03 and MEM#04.