TM4C1290NCPDT: Program by USB directly?

user4732430

Is it possible to program the controller using USB (ICDI) directly?Currently, we are using JTAG for that.We want both options.Please share details for that.

over 9 years ago

0 Bob Crosby over 9 years ago

TI__Guru 72500 points

It is possible to program a blank TM4C device via USB. If there is not a valid stack pointer or reset vector in the device, the ROM bootloader will configure the USB port to respond as a USB DFU (Device Firmware Upgrade) device. Here is information on TM4C bootloaders: www.ti.com/.../spmu301d.pdf

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1290NCPDT: Program by USB directly?