EK-TM4C1294XL: WolfSSL with TM4C1294XL

Narinder Bajwa

Prodigy 95 points

Part Number: EK-TM4C1294XL

I am trying to implement HTTPS client using wolfssl 3.8.0, TI compiler ti-cgt-arm_5.2.5.

HTTP works fine but when I use HTTPS I am getting -102 on connect.

Is it a certificate problem or something else.

Please help.

Regards...Narinder

over 8 years ago

0 Charles Tsai over 8 years ago

TI__Guru**** 191296 points

Hi,
Are you using WolfSSL with TI-RTOS? If yes, please refer to this wiki page processors.wiki.ti.com/.../Using_wolfSSL_with_TI-RTOS that might be helpful to your problem. I will also pass your post to our SME. I don't have experience with WolfSSL.

0 Sai Reddy over 8 years ago

TI__Mastermind 22580 points

Hello Narinder,

Did you look at the "httpsget" example in TI-RTOS for the "EK_TM4C1294XL" board? That should get you started with a basic HTTPS example using wilfSSL.

Thanks,
Sai

0 Narinder Bajwa over 8 years ago in reply to Sai Reddy

Prodigy 95 points

Hi Sai,

Yes, thats what I am using.
I am using tirtos_tivac_2_16_01_14 environment.

It could be something I am missing in the configuration.

Regards...Narinder

0 Narinder Bajwa over 8 years ago in reply to Charles Tsai

Prodigy 95 points

Hi Charles,

Yes, I followed all those steps.

This error code has something to do with random number generator. It is not getting the seed.

Regards..Narinder

Arm-based microcontrollers

Arm-based microcontrollers forum

EK-TM4C1294XL: WolfSSL with TM4C1294XL