• State
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 672 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS1224: DCAN, How to use Loop Back Mode to debug?

Joe X20
Intellectual 430 points
Part Number: TMS570LS1224
Other Parts Discussed in Thread: HALCOGEN

Hi, All. I have no idea how to use loopback mode to debug. The sample code in HalCoGen is not for DCAN. Could you share some sample code to me? Thank you very much.

  • 0
    TI__Guru 59540 points
    Hello Joe,

    Try using this thread as a guideline e2e.ti.com/.../477047. The link leads to a post with both a pdf of some slides walking through HalCoGen setup and code changes needed including enabling loopback. It also includes a project file, which will probably need so updates as it was generated with an old version of Halcogen and is for an older MCU in the Hercules family.