RTOS/TM4C1294NCPDT: TM4C1294: Sleep Mode TI RTOS

Arthur ke

Intellectual 320 points

Part Number: TM4C1294NCPDT

Tool/software: TI-RTOS

Hi All,

We are using TM4C1294 with tirtos_tivac. We want to set 1294 into sleep mode to reduce power consumption.

How to setting to switch sleep mode and wake up?

Any information or setting on the same will be really helpful for us.

Regards,
Arthur

over 8 years ago

0 Charles Tsai over 8 years ago

TI__Guru**** 183956 points

Hi Arthur,
We don't have a TI-RTOS based sleep mode example for TM4C129 but we do have a non-TI-RTOS example that illustrates sleep mode. Please take a look at the sleep_modes example under <TivaWare_Installation>\examples\boards\ek_tm4c1294xl\sleep_modes.

0 Arthur ke over 8 years ago in reply to Charles Tsai

Intellectual 320 points

Hi Charles,
I found that example under TivaWare C.
I #include "driverlib/rom.h" but it seem not used in TI-RTOS project.
Could I use those sleep function(ROM_SysCtlSleep,ROM_SysCtlPeripheralSleepEnable...) in TI-RTOS project?
Or TI-RTOS not supports sleep mode.

regards,
Arthur

0 Charles Tsai over 8 years ago in reply to Arthur ke

TI__Guru**** 183956 points

Hi Arthur,

I don't think TI-RTOS supports power saving modes for TM4C. I'm not too sure how/if the power saving feature will work with the TI-RTOS.

www.ti.com/.../spruhd4m.pdf

0 Arthur ke over 8 years ago in reply to Charles Tsai

Intellectual 320 points

Hi Charles,

Thank you for your reply.

regards,
Arthur

Arm-based microcontrollers

Arm-based microcontrollers forum

RTOS/TM4C1294NCPDT: TM4C1294: Sleep Mode TI RTOS