CCS/TMS570LS20216: FlexRay Protocol HardWare for 13 nodes in network source code

Andy918

Part Number: TMS570LS20216
Other Parts Discussed in Thread: TMS570LS3137, TMS570LS1227

Tool/software: Code Composer Studio

Hello,

We would like to reference FlexRay Module Training (SPRT718.PDF) Page 6 for FlexRay Protocol HardWare 13 nodes in network

www.ti.com/.../sprt718.pdf

Would like to ask where can download demo code for reference.

Thanks,

over 8 years ago

0 QJ Wang over 8 years ago

TI__Guru**** 196156 points

Hello Andy,

I have the demo code. How many nodes are in your application? Please give me your email, I will send you by email.

Regards,
QJ

0 Andy918 over 8 years ago in reply to QJ Wang

Intellectual 600 points

Hi QJ,

We need test 8 nodes , my Email is : Andy.Cheng@arrowasia.com

Thanks,

0 QJ Wang over 8 years ago in reply to Andy918

TI__Guru**** 196156 points

Hi Andy,

The code was sent to your email. The number of nodes is configurable. There is one project for all the nodes, but you need to change the node number (1,2,3...n) for each node in sys_main().

Regards,

0 Andy918 over 8 years ago in reply to QJ Wang

Intellectual 600 points

Hi QJ,

Thank you for your support, the code can work on TMS570LS20216 , if chip want change to TMS570LS1227 and TMS570LS3137, the code need to modify or you have other demo code can send to me.

Regards,

Andy

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TMS570LS20216: FlexRay Protocol HardWare for 13 nodes in network source code