Compiler/TM4C1294NCPDT: CCS

KISHAN%20PATEL

Part Number: TM4C1294NCPDT

Tool/software: TI C/C++ Compiler

Hi....

I am edit the qs_iot for for multiple LED and there is one problem after add 4 or more LED it's program not work for 4 led and i also edit the "alias" in exosite data and the program please help me or give some suggestion????

over 8 years ago

0 Bob Crosby over 8 years ago

TI__Guru 72500 points

Were you able to successfully run the qs_iot example using the Exosite before you made modifications?

0 KISHAN%20PATEL over 8 years ago in reply to Bob Crosby

Intellectual 340 points

Yes ...after i modification ...and add two more led on-off switch program...

0 KISHAN%20PATEL over 8 years ago in reply to KISHAN%20PATEL

Intellectual 340 points

and i am one more led after the 4 led then it's not work serial is stop..

0 Bob Crosby over 8 years ago in reply to KISHAN%20PATEL

TI__Guru 72500 points

Sorry, you will need to debug it. I suggest you minimize the changes from a working version to your failing version then start to debug. Is the CPU stuck in an abort routine? You may have accessed a peripheral you did not enable.

0 KISHAN%20PATEL over 8 years ago in reply to Bob Crosby

Intellectual 340 points

THANK'S Sir...

Arm-based microcontrollers

Arm-based microcontrollers forum

Compiler/TM4C1294NCPDT: CCS