Starterware/LAUNCHXL2-570LC43: TMS570LC4357

Hello Sunil,

The HalCoGen drivers include a Flash Emulated EEPROM driver (FEE) that will include drivers for writing, reading and erasing bank7. This should provide a good framework for other banks as well if there is a desire to program them as well.

Dear e2e,

  Is there any Ethernet boot loader application example for TMS570LC4357. 

Hello Sunil,

We have Ethernet bootloader for LS3137. You can import to LC4357 with minor modification (device initialization, etc).

Hi QJ Wang,

Can you tell me the specific changes which i have to do for TMS570LC4357 launch pad.

because i have generated device specification code from HALCoGen and i replaced  HL_pinmux.h and HL_pinmux.c

from the the 3137 bootloader project which is having file name as    hw_pinmux.h and hw_pinmux.c this changes makes some error 

so if i get the specific changes for TMS570LC4357 launnch pad it helps a lot

Hi e2e,

I am expecting some response from ti.

the support you are providing is to much slow. 

Hello Sunil,

I apologize for the delayed response. Currently our Houston area office, where our Hercules team is located, is closed due to the affects of Hurricane Harvey and related record flooding. Although our facility is fine with no damage or flooding, many of the people that work here live in areas that have been heavily impacted or have been under mandatory evacuations. Our facility is expected to reopen next Tuesday, September 5th. Thank you in advance as we ramp our support back up and try to take care of the back log of questions and open issues.