RM57L843: Errata DEVICE#56 means physical debugger connection or connect-to-CPU in CCS?

This is only during Trace operation and not during a conventional debug session with CCS. i.e., it is only when using the ETM and Trace tools.

It may not be triggered every Debug Halt condition when tracing. It will only be an issue when the following three conditions are met:
1.) Tracing is enabled,
AND
2.) the processor enters debug halt state either because EDBGRQ was asserted or because of a write to the DRCR,
AND
3.) at the time it stopped executing instructions in order to enter debug halt state, the processor was not part-way through executing a load or store multiple instruction.