• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 31 subscribers
  • Views 479 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/TM4C129XNCZAD: TivaWare Graphics Font Reference Missing

Peter Borenstein
Mastermind 8695 points

Why is the TivaWare Graphics Library User's Guide missing the font reference? SPMU300D chapter 16 claims to have a table of fonts, but it is followed by 153 blank pages. I have a hunch these pages are unintentionally blank.

http://www.ti.com/lit/ug/spmu300d/spmu300d.pdf

  • 0
    TI__Guru*** 135355 points

    Hello Peter,

    Your hunch is spot on. Those pages were misgenerated it seems. Even more interesting is I had to go back to version 2.1.0 to find a document which wasn't misgenerated. I am attaching it for you so you can reference the fonts, hope that is sufficient! Kind of surprised no one else mentioned this sooner...

    8422.SW-TM4C-GRL-UG-2.1.0.12573.pdf

  • 0 in reply to Ralph Jacobi
    Guru 117855 points

    Ralph Jacobi said:
    Kind of surprised no one else mentioned this sooner...

    With the, "uninspired, unjustified & unwanted" beheading of the "LIKE" - can you (reasonably) expect such contribution from we (lowly) and now (depressed) forum users?    (unless your targeted,  "no one"  was staff person)

    Indeed (someone) @ "factory central" should - at least - perform (some) periodic document review - catching such horrors...