• State
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 582 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Compiler/RM48L952: Flash erase and write is not working in the example code given for Boot loader

Muthu S
Intellectual 720 points
Part Number: RM48L952

Tool/software: TI C/C++ Compiler

Dear Team,

One of the customer is working on RM48L952 serial Based bootloader using the example code given in the http://processors.wiki.ti.com/index.php/Category:RM4

Flash erase and write api functions were not working.

Please share working Flash Erase and write functions/code.

Thanks & Regards,

Muthu S

  • 0
    TI__Guru 59540 points
    Hello Muthu,

    I believe this is the same topic that has been posted 2x's before. To minimize confusion, I would suggest we focus the discussion to the original post/thread. I have already posted some questions/suggestions about the implementation and also directed to the more recent application note with example code within that thread. These examples have been tested and proven to work so it is likely there is something missed or something that is being done differently than intended causing the functions to fail.

    See my posts on this thread which we should use as a single point for discussions moving forward: e2e.ti.com/.../2288273
  • 0 in reply to Chuck Davenport
    TI__Guru 59540 points
    Muthu,

    Also, I wanted to apologize for the delays in answering these posts. Our Hercules support team is located in the Houston, Tx area and many have been displaced and/or seriously impacted by the aftermath of Hurricane Harvey. Our site is technically closed until next Tuesday, September 5th but we are trying to get support up and running as much as possible even if we might be limited by our access to some of our experts and to our work benches.