• State Resolved
  • Locked Locked
  • Replies 2 replies
  • Subscribers 30 subscribers
  • Views 996 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LC4357: MII and Microchip KSZ8863 (Ethernet Switch) or similar

Lars von Wachenfeldt
Intellectual 955 points
Part Number: TMS570LC4357

Hi,
has anyone experience of MII interfacing with Microchip switches/PHY? 
Sample code? Examples? URLs? 

Thanks in advance,
Lars
Bombardier Transportation, Rail Control Solutions

  • 0
    TI__Guru 59540 points
    Hello Lars,

    I am not aware of anyone that has used any such Ethernet Switch or PHY with Hercules and am fairly certain we have not included it in any of our TI supported designs for development boards or reference designs. You may try checking on an associated microchip forum for those specific devices to see if anyone has experience in interfacing with a Hercules device. At a minimum, you may, at least, get some reference code that could give you a general sequence of the use of those devices and examples of the hookup in a generic way.
  • 0 in reply to Chuck Davenport
    Intellectual 955 points

    Hello Chuck,
    thank you very much for the tip! And thank you for your fast and helpful answers! Top notch! 

    Kind regards,
    Lars