• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 556 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TMS570LS0232: How to configure ESM group1 for NERROR?

Xinyu Wang
Intellectual 845 points
Part Number: TMS570LS0232
Other Parts Discussed in Thread: HALCOGEN, TMS570LS3137,

Tool/software: Code Composer Studio

Hello, TI Engineers

I have seen many error sources in ESM is reserved. How to use them for safety function? And could I use HALCoGen to configure them? 

Thanks!

Regards!

Xinyu

  • 0
    TI__Guru 72500 points
    No, the reserved ESM channels are for signals that are not on your TMS570LS0232 device. We try to keep the ESM channels the same function for the entire Hercules family. The TMS570LS0232 is the low end device of the family. For example, Group 1 channel 1 is for MibADC2 - parity error on the TMS570LS3137 device, but is reserved on the TMS570LS0232 because it does not have a second MibADC.