RTOS/TM4C129XNCZAD: NDK User Guide for TM4C processors

Peter Borenstein

Tool/software: TI-RTOS

The NDK User's Guide, SPRU523J, says "The document covers NDK programming as it applies to the TMS320C6000, Cortex-A8, and ARM9 programming environment"

Is there a separate guide for TM4C ARM M4F cores?

over 8 years ago

0 Ralph Jacobi over 8 years ago

TI__Guru*** 135355 points

Hello Peter,

From what I saw, it looks like that document applies to TM4C and is just not properly labelled in terms of explaining it's coverage. I've seen it referenced for past TM4C NDK inquiries. That said, I'll see about looping in an expert from that team to confirm.

0 ToddMullanix over 8 years ago in reply to Ralph Jacobi

TI__Guru* 96960 points

Looks like we missed that when we added Cortex-M support. As Ralph noted, the doc is valid for TM4C (and other Cortex-M devices).

Todd

Arm-based microcontrollers

Arm-based microcontrollers forum

RTOS/TM4C129XNCZAD: NDK User Guide for TM4C processors