HALCoGen EMIF and CRC modules configuration

Evgenyy

Other Parts Discussed in Thread: HALCOGEN

I have a question, how to configure EMIF and CRC modules in HALCoGen? The access to that 'blue-box' modules seems not allowed in the current HALCoGen release?

Also what about SYS and FlexRay 'blue-box' modules in the peripheral group, how to make settings for these peripherals?

over 14 years ago

0 S Tsuei over 14 years ago

TI__Intellectual 1030 points

Currently HALCoGen doesn not support for EMIF, CRC and FlexRay. We will keep this under consideration for future development.

0 Anthony F. Seely over 14 years ago in reply to S Tsuei

TI__Guru 68920 points

Hi Stephanie,

HalCoGen is also missing DMA at the moment, but there was a post:

http://e2e.ti.com/support/microcontrollers/tms570/f/312/t/63549.aspx

With an example that included some add on header files for the DMA controller.

Seems like it would be a good idea to post similar header files for EMIF, CRC, etc..

0 Evgenyy over 14 years ago in reply to Anthony F. Seely

Intellectual 490 points

This will be a really good thing to do.. All this modules need some source examples.. and app-notes too, I think..

Arm-based microcontrollers

Arm-based microcontrollers forum

HALCoGen EMIF and CRC modules configuration