TMS570LS1114: Please give me some advice about transplant the SPNA186 Bootloader PC Side code.

Qiu chi

Expert 1210 points

Part Number: TMS570LS1114

Dear Experts

I still met a problem when I develop a Bootloader PC based on VS2010 enviroment.

I transplant the code from spna186. without a NI adaptor,I have to transplant the code at another adaptor.

When my program run passing the Get_Binary(filename),I watch the value is 0.

All the varable is seems as the sample code.Please give me some advice about transplant the code.

Best Regards

Qiuchi

over 7 years ago

0 Qiu chi over 7 years ago

Expert 1210 points

C++ Project based on VS 2010

0 Qiu chi over 7 years ago

Expert 1210 points

0 Chuck Davenport over 7 years ago in reply to Qiu chi

TI__Guru 59540 points

Hello Qiuchi,

Given this is on the PC side of the application and you are using a different tool, I don't know if this is something we can support but I am going to forward to our boot loader expert and the author of the application note. Perhaps there is some advice he can give.

0 QJ Wang over 7 years ago in reply to Chuck Davenport

TI__Guru**** 196246 points

Hello QiuChi,

Please make sure your image file is raw binary file. You can generate binary file from CCS7.

Add post-build commands in CCS build option:

"${CCS_INSTALL_ROOT}/utils/tiobj2bin/tiobj2bin" "${BuildArtifactFileName}" "${BuildArtifactFileBaseName}.bin" "${CG_TOOL_ROOT}/bin/armofd" "${CG_TOOL_ROOT}/bin/armhex" "${CCS_INSTALL_ROOT}/utils/tiobj2bin/mkhex4bin"

0 Qiu chi over 7 years ago in reply to Chuck Davenport

Expert 1210 points

Dear Chuck
Now I debug the Hyper Terminal successfully ,due to my lack of C++ knowledge,Thank your help.
Best and Regards
Qiuchi

0 Qiu chi over 7 years ago in reply to QJ Wang

Expert 1210 points

Dear QJ Wang
Now I debug the Hyper Terminal successfully ,due to my lack of C++ knowledge,Thank your help.
Best and Regards
Qiuchi

0 QJ Wang over 7 years ago in reply to Qiu chi

TI__Guru**** 196246 points

Hello Qiuchi,

Does your PC side SW work?

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS1114: Please give me some advice about transplant the SPNA186 Bootloader PC Side code.