• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 500 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1294NCPDT: How to Assign the Static IP Address during the Mass Production Time

erik lee2
Genius 3060 points
Part Number: TM4C1294NCPDT

hi,

If we want to use the static IP address instead of using DHCP, how to program the static IP address in each product during the mass production?

any tool available? Thank you.

  • 0
    TI__Guru 72500 points
    Is the question how to program the static IP address, or how to set a static IP address? Do you plan on storing the IP address in main flash, a flash User Register, or in the emulated EEPROM? Do you want to program the IP address at the same time you program the application code, or do you have some interface that you can input the IP address as part of the initial testing?
  • 0
    TI__Guru 72500 points
    I haven’t heard back from you, I’m assuming you were able to resolve your issue. If not, just post a reply below (or create a new thread if the thread has locked due to time-out).