TMS570LS1114: Bootloader Code Problem?@QJ Wang

Qiu chi

Part Number: TMS570LS1114

Dear QJ Wang:

So, what should I do next. I still think may be the problem appearing in the bootloader code that I transplant. I have posted my bootloader project in this theme.Do it can connect with my PC Code or other PC. Please give me some advice.May be I need rewrite

The Packetwrite() and Packetread()?In fact, I have some confused to figure out the code .

Yesterday, I have load the APP by JTAG(start address is 10100).My bootloader can jump to the APP.

Thanks and Regards

Qiuchi

over 7 years ago

0 QJ Wang over 7 years ago

TI__Guru**** 199096 points

Hi QiuCHi,

Please post your boardloader with your modifications. Thanks

0 Qiu chi over 7 years ago in reply to QJ Wang

Expert 1210 points

https://e2e.ti.com/cfs-file/__key/communityserver-discussions-components-files/312/6180.Prj_5F00_Bootloader_5F00_CS_5F00_316.7z

Dear QJ Wang:

This is my modifications.In fact,I only modifify the dcan.c . Pr_Bootloader_316 is the project

0 QJ Wang over 7 years ago in reply to Qiu chi

TI__Guru**** 199096 points

Hi Chi,

Just sent you a CAN test case, please do a test using the test case to check if your PC sizde SW tool transmit data correctly.

0 Qiu chi over 7 years ago in reply to QJ Wang

Expert 1210 points

Dear QJ Wang:

Thanks for your enthusiastic answer.

Because these topic repeat,I close it.And another topic I have tested your code and make sure having data at the CAN bus.

Thanks and Regards

Qiuchi

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS1114: Bootloader Code Problem?@QJ Wang