TM4C1294KCPDT: ELEC#02 of Errata

Hiroyasu Tazawa1

Hi,

Let me talk about ELEC#02 of Errata.

Damaged of Vbat pin is described in Errata.
Could you tell me what kind of state the pin will be ?
I guess it is latch up or short.

VDD pins are short in customer's target board.

Best Regards
Hiroyasu

over 8 years ago

0 Charles Tsai over 8 years ago

TI__Guru**** 191886 points

Hi Hiroyasu-san,
Even though it is not specifically stated in the errata, I think the damage to the pin can include latch or short. Did you implement the R/C circuit as described in the workaround?

0 Hiroyasu Tazawa1 over 8 years ago in reply to Charles Tsai

Guru 12350 points

Dear Charles-san

Thank you for your feedback.
I got it.

My cusomer does not implement R/C filter for workaround.
We should point out.

Thank you.

Best Regards
Hiroyasu

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1294KCPDT: ELEC#02 of Errata