EK-TM4C1294XL: Want PCB soft copy file

Yogesh Joshi

Part Number: EK-TM4C1294XL
Other Parts Discussed in Thread: TM4C1294NCPDT,

We are developing a product by using TM4C1294NCPDT MCU We are using EK-TM4C1294XL launchpad for POC. So please send the PCB soft copy (Altium) File of EK-TM4C1294XL board so it will be very useful to us for fast development. We are also using the EVM of 4400 We got its PCB file of Altium.

over 6 years ago

0 Ralph Jacobi over 6 years ago

TI__Guru*** 133215 points

Hello Yogesh,

The LaunchPad is designed for quick prototyping and evaluation of our devices, but it is not ideal to base your end system design from it.

This TI Design would be a much better source for you start from, and it includes the full Altium project:

Please also follow our System Design Guidelines document in addition: http://www.ti.com/lit/pdf/spma056

0 Yogesh Joshi over 6 years ago in reply to Ralph Jacobi

Intellectual 655 points

Yes, thanks. We want the footprints, components library for that we want the soft copy of PCB (Altium) file. We will change all respective changes from our side. So for quick work we need the Altium file.

0 Ralph Jacobi over 6 years ago in reply to Yogesh Joshi

TI__Guru*** 133215 points

Hello Yogesh,

I don't think I fully understand then, what is missing from the Altium project on our TI design that you need? There are PcbDoc and SchDoc files along with the full Altium Project...

0 Yogesh Joshi over 6 years ago in reply to Ralph Jacobi

Intellectual 655 points

Libraries of components are not found in it..

0 Ralph Jacobi over 6 years ago in reply to Yogesh Joshi

TI__Guru*** 133215 points

Hello Yogesh,

As I am not an Altium expert I need to sync with a colleague once back in the office, sorry for the delay.

0 Yogesh Joshi over 6 years ago in reply to Ralph Jacobi

Intellectual 655 points

No problem thanks for support.

0 Ralph Jacobi over 6 years ago in reply to Yogesh Joshi

TI__Guru*** 133215 points

Hello Yogesh,

Component libraries can be found with our Ultra Librarian tool: https://webench.ti.com/cad/

You can download the footprint from there to generate footprints for TI devices.

Because of the holidays, TI E2E™ design support forum responses will be delayed from Dec. 25 through Jan. 2. Thank you for your patience.

Arm-based microcontrollers

Arm-based microcontrollers forum

EK-TM4C1294XL: Want PCB soft copy file