CCS/RM46L852: SEGGER J-Link and RM46

Kubiks

Part Number: RM46L852
Other Parts Discussed in Thread: SEGGER, TMS570LS3137

Tool/software: Code Composer Studio

Hello!

I want to use the SEGGER J-LINK together with CCS. While trying to install the J-LINK Driver for CCS, i have recognized, that i can't install it together with Hercules Safety MCUs.

Does that even work, and how can i install it? :-)

thanks and greetings

Kubiks

over 7 years ago

0 QJ Wang over 7 years ago

TI__Guru**** 196566 points

Hi Kubiks,

The CCS supports Segger J-Link emulator. and The J-Link emulator supports Hercules MCU. I just tried on TMS570LS3137 HDK with Segger J-Link V8.0 emulator:

0 Kubiks over 7 years ago in reply to QJ Wang

Prodigy 120 points

Thanks for your help! :-) I'm able to debug a single MCU now.

Can you tell me, how i can debug two MCUs with two J-Links simultaneously?

Greets,

Kubiks

0 QJ Wang over 7 years ago in reply to Kubiks

TI__Guru**** 196566 points

Hello Kubiks,

Theoretically, it should be possible to have simultaneous debugging of two different targets using two different types of debug emulators.

processors.wiki.ti.com/.../Multi-Emulator_Debug_with_CCS

0 Kubiks over 7 years ago in reply to QJ Wang

Prodigy 120 points

Is there a way, to debug with 2 Segger J-Links?

0 QJ Wang over 7 years ago in reply to Kubiks

TI__Guru**** 196566 points

Hello Kubiks,

You can get more information from CCS forum.

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/RM46L852: SEGGER J-Link and RM46