CCS/RM57L843: Lwip debug messages enable

Hello Errico,

I just did a test, and got a lot of compile errors too. I will forward to SW team to check it. Thanks

Any news from the SW team?

Thank you

Errico

Hello Errico,

To use the LWIP_DEBUG, we need to define the function of LWIP_PLATFORM_DIAG(message) which is used in debug.h:

#define LWIP_DEBUGF(debug, message) do { \
if ( \
((debug) & LWIP_DBG_ON) && \
((debug) & LWIP_DBG_TYPES_ON) && \
((s16_t)((debug) & LWIP_DBG_MASK_LEVEL) >= LWIP_DBG_MIN_LEVEL)) { \
LWIP_PLATFORM_DIAG(message);\
if ((debug) & LWIP_DBG_HALT) { \
while(1); \
} \
} \
} while(0)

You can use sciSend(..)

Hi QJ,

       the definition for LWIP_DEBUG that you sent me is already included in the file debug.h

I don't understand how I can use sciSend(..), could you give me an example?

Thank you very much for your help

I will be waiting for your reply

Errico

Hi QJ,

             thank you very much for your reply. I replaced lwiopts.h and I added the uartstdio.h file. Everything goes much better but I only have a problem: UARTprintf() function is not defined.

Where do you define UARTprintf()? Could you please help me with this last problem?

Thank you very much

Errico

Hi Errico,

It is in uartstdio.c. I posted both header file and source file.