TM4C123GH6PM: Difference between the Emulator and ICDI

Asif Hussain13

Intellectual 475 points

Part Number: TM4C123GH6PM
Other Parts Discussed in Thread: EK-TM4C123GXL

Hi.

What is the difference between the Emulation available in MSPEXP430G2 and ICDI on EK-TM4C123GXL.

over 7 years ago

0 Charles Tsai over 7 years ago

TI__Guru**** 190406 points

HI,
Not really familiar with the MSP EXP430G2 product. I think the MSP-EXP430G2 on-board debug probe offers several features that are enabled by a 2-wire JTAG interface called SpyBi-Wire. For details on supported debug probes for MSP430 processors you can refer to this www.ti.com/.../slau647l.pdf or post your questions to the MSP430 forum.
The ICDI on the EK-TM4C123 board is a JTAG based debug probe.

0 Charles Tsai over 7 years ago in reply to Charles Tsai

TI__Guru**** 190406 points

Hi,
Please post your question concerning MSP-EXP430G2 to the MSP forum at e2e.ti.com/.../. We don't have much knowledge about the MSP430 products as this forum is supporting TM4C devices only. As I mentioned the ICDI in the TM4C launchpad is a JTAG based debug probe.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C123GH6PM: Difference between the Emulator and ICDI