RM46L440: Compact Flash Card Driver with FATFs

Frank Lee96

Part Number: RM46L440
Other Parts Discussed in Thread: HALCOGEN, TMS320F28335

Hi TI,

In our project,we need to get configuration informations from Compact Flash Card by MCU's data buses,how to coding CF card drivers and port the FATFs to our application?

over 8 years ago

0 QJ Wang over 8 years ago

TI__Guru**** 201486 points

Hello Frank,

If the CF supports SPI mode, you can use HALCoGen to generate SPI driver as the starting point.

0 Frank Lee96 over 8 years ago in reply to QJ Wang

Intellectual 830 points

But the CF don't support SPI mode,what I should do?
Best Regards,
Frank

0 QJ Wang over 8 years ago in reply to Frank Lee96

TI__Guru**** 201486 points

Hi Frank,

If it requires a special CF dedicated interface, our devices don't have this kind of interface.

0 Frank Lee96 over 8 years ago in reply to QJ Wang

Intellectual 830 points

The CF card interface as follow.

How to interface it with TMS320F28335?

0 QJ Wang over 8 years ago in reply to Frank Lee96

TI__Guru**** 201486 points

Hello,

Reading the signals required by the CF in your schematics, I think that the EMIF doesn't meet the those requirements.

0 Frank Lee96 over 8 years ago in reply to QJ Wang

Intellectual 830 points

Are there a MCU which integrates the CF controller in your product series?
Regards,
Frank

0 QJ Wang over 8 years ago in reply to Frank Lee96

TI__Guru**** 201486 points

Hello Frank,

Hercules device don't support CF. I am not sure about C2000, MSP430, and processors. Please post your questions to C2000 and MSP430 forum.

Arm-based microcontrollers

Arm-based microcontrollers forum

RM46L440: Compact Flash Card Driver with FATFs