• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 31 subscribers
  • Views 757 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1294KCPDT: Programmer/Debugger

Wing Wong
Prodigy 190 points
Part Number: TM4C1294KCPDT
Other Parts Discussed in Thread: EK-TM4C1294XL

1.       I dry to replace the LM3S9D92 with TM4C1294K on a functional board, the TM4C123xH6PMI will not be include on the new board, as it show on EK-TM4C1294XL. The new board will have the TM4C1294K only.

2.       I am looking for an external Programmer/debugger to program/debug the new board, directly connect to the TM4C1294K JTAG, or PC0 to PC3. Is it require any support driver on the new board?

3.       May any one recommend a programmer/Debugger with minimum pin count and support my new board, please? 

  • 0
    TI__Guru*** 135355 points

    Hello Wing,

    I assume you are trying to do a new PCB layout with the TM4C129x device?

    For external debugger, there are many options. XDS200 is a good one, as is the newer XDS100. There are some non-TI options as well which you may want to investigate.

    This document mentions various debuggers and discusses all the connector types and the hardware layout requirements for them, I think you will find all your answers here: http://www.ti.com/lit/an/spma075/spma075.pdf