• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 30 subscribers
  • Views 754 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS1225: Can I share the single crystal frequency Oscillator between multiple TMS570 Microcontrollers ?

Saravanakumar S93
Expert 1300 points

Part Number: TMS570LS1225

Hi All,
In our current project, We have two microcontrollers in the same PCB(Single Euro PCB Size).
Is it possible to share a single crystal frequency oscillator across two TMS570 microcontrollers?


Regards,
S.Saravanakumar

  • 0
    TI__Mastermind 49120 points
    Hi Saravanakumar,

    You could program one TMS570 to output the oscillator frequency on the ECLK pin and connect that to the OSCIN pin of the other TMS570. You have to be careful about ringing effects during board layout in this case.

    Importantly, please note that this is probably not the right solution if you have any sort of redundancy / checking performed using the two TMS570 MCUs for functional safety requirements.

    Regards,
    Sunil