Because of the Thanksgiving holiday in the U.S., TI E2E™ design support forum responses may be delayed the week of November 23.

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

RTOS/TM4C1292NCPDT: Setting flash user registers in run time

Part Number: TM4C1292NCPDT
Other Parts Discussed in Thread: UNIFLASH

Tool/software: TI-RTOS

Hi,

I am trying to set the flash user registers after configuring NDK in my application. If we set flash user registers after NDK configuration, will there be any ethernet connection problem? I set the flash user registers using the function FlashUserSet().

Then I tried to read the registers using the function FlashUserGet(). But I am always receiving value 0 for these registers.

As described in the forum, https://e2e.ti.com/support/microcontrollers/tiva_arm/f/908/t/371477 I unlocked the registers using CCS UniFlash utility. Now also I am receiving value 0 for user registers while reading user registers.. What might be the reason for this?

Regards

Sandra