• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 640 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TM4C1294NCPDT: How do I program the MAC address to my custom design which is using the TM4C1294?

Gary Armstrong
Expert 1845 points
Part Number: TM4C1294NCPDT
Other Parts Discussed in Thread: UNIFLASH

How do I program the MAC address to my custom design which is using the TM4C1294?  I have inherited a TM4C1294 design from an engineer that has left the company. We have updated the PCB for his design and now I need to download the firmware. I realized that I don't know how to program the MAC address. I have been using the XDS100v2 to download/debug the previous design. I have the LM Flash tool but I'm not sure how to connect to my board.

  • 0
    TI__Guru**** 182696 points

    Hi Gary,

     You can use the Uniflash to program the MAC address. You can use LM flash programmer to program the MAC address only if you have the ICDI debug probe. Please see below.