RM48L952: RM48L952

Hello Immanuel,

This is example for UDP. Just as a reference

struct pbuf *Tx;
uint16_t length=0;
char msg[5];

_enable_IRQ();
EMAC_LwIP_Main(emacAddress);
IP4_ADDR(&Src, 192, 168, 0, 12);
IP4_ADDR(&Dst, 192, 168, 0, 10);
IP4_ADDR(&netmask, 255, 255, 255, 0);
IP4_ADDR(&gw, 192, 168, 0, 1);
pcb=udp_new();
error=udp_bind(pcb,&Src,PORT_NO);
error=udp_connect(pcb,&Dst,PORT_NO);
length = 5;
Tx=pbuf_alloc(PBUF_TRANSPORT,length, PBUF_RAM);
Tx->next=0;
Tx->len=Tx->tot_len=length;
memcpy (Tx->payload, msg, Tx->len);
udp_sendto(pcb, Tx, &Dst, PORT_NO);
pbuf_free(Tx);

Dear Wang,

Thanks for your reply,
I will check and get back to you.

Regards,
Immanuel

I don't have simple test case for TCP, for example TCP echo etc.

Dear Wang,

I have tried to port the code. but I am getting the error as the Src,Dst,netamsk,PORT_NO are not defined.

And also, the function EMAC_LwIP_Main(emacAddress) is doing many server configuration.

I need an application like sending data and receiving using UDP.

Regards,
Immanuel