TM4C1294NCPDT: GETTING STARTED

vikas kumar24

Part Number: TM4C1294NCPDT

Hi all,

I want to begin with TM4C1294NCPDT. For this what software tools i need for development and debugging. I already installed CCSv7.

over 7 years ago

0 Markel Robregado over 7 years ago

Guru 86745 points

Hi Vikas,

I suggest you use the latest CCSv8. processors.wiki.ti.com/.../Download_CCS

You can also download the latest Tivaware from this link. http://www.ti.com/tool/SW-TM4C

-kel

0 Charles Tsai over 7 years ago

TI__Guru**** 191256 points

Hi Vikas,

On top of what was suggested by Markel, you can also find workshop training materials at . Even though this is for TM4C123 device it will cover a lot of common features with TM4C129. Once you download the TivaWare there are many examples under the <TivaWare_Installation>/examples/boards/ek_tm4c1294xl for you to start with.

0 Markel Robregado over 7 years ago in reply to Charles Tsai

Guru 86745 points

There is also a TM4C1294XL Connected Launchpad Workshop, see link below. Download the workbook pdf from the link.

processors.wiki.ti.com/.../Creating_IoT_Solutions_with_the_TM4C1294XL_Connected_LaunchPad_Workshop

-kel

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1294NCPDT: GETTING STARTED