• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 366 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

Problem using interrupt with SW1 on Tiva Launchpad

CCS/TM4C123GH6PM: Problem using interrupt with SW1 on Tiva Launchpad

Haris Sajwani
Prodigy 10 points
Part Number: TM4C123GH6PM

Tool/software: Code Composer Studio

Hi ,

Can you tell what changes you made to correct this error? I am getting the same error. 

  • 0
    Guru 117855 points

    Haris Habibullah said:
    Can you tell what changes you made to correct this error? I am getting the same error. 

    As the one who, 'Guided poster Konstantinos to success' - it is believed, 'All of the detail you require - resides w/in that thread!'

    And - iirc - poster received 'NO Error' - instead his Led did not toggle to his expectation.

    Greater 'Attention to Detail' should guide you - as well it did for that past poster - to success...