• State Resolved
  • Locked Locked
  • Replies 3 replies
  • Subscribers 30 subscribers
  • Views 379 views
  • Users 0 members are here
Support feedback
Options
Options
Similar topics

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

CCS/TM4C123BH6PM: Problems with projects properties

Liquidbeam
Intellectual 470 points
Part Number: TM4C123BH6PM

Tool/software: Code Composer Studio

Hi everyone!

I have been busy on a ti-rtos based project for a while and need to set up CCS on my notebook now. Good step to move from CCS6.1.1 to CCS8.1.0 I thought.

Unfortunately when I open the projects properties and switch from debug to release or vice versa, the settings page remains emtpy. Anyone had the same problems?

Best regards, Simon

  • 0
    TI__Guru**** 441251 points
    Hi Simon,
    A screenshot would be helpful here. Can you provide one?

    Also, please provide which host OS you are running CCS on.

    Thanks
    ki
  • 0 in reply to Ki
    TI__Guru**** 441251 points

    Simon, your issue sounds related to known issue CCSIDE-3385. To confirm, try the workaround as described below:

    If you change the active build configuration first either from project context menu Build Configurations->Set Active, or from Project Properties->Manage Configurations->select and Set Active, then the settings can be viewed/changed without errors.

  • 0 in reply to Ki
    Intellectual 470 points
    Hi Ki,

    thank you! This workaround seems to work so far. I hope there will be a real solution within the next CCS updates.

    Best regards, Simon