CCS/TM4C1294NCPDT: Using switches in Tiva Launchpad

deathrider

Prodigy 155 points

Part Number: TM4C1294NCPDT

Tool/software: Code Composer Studio

hello im using EK-TM4C1294 launch pad

program to turn on led using switch (sw1 orsw0)

below is my code attached i dono wts wrong in this, when i run the code only led is turned on noswitch is working ,

if any mistake please share ur source code

over 7 years ago

0 Ralph Jacobi over 7 years ago

TI__Guru*** 135355 points

Hello,

Please see Item #4 of our forum guidelines regarding DRM code: e2e.ti.com/.../695568

0 deathrider over 7 years ago in reply to Ralph Jacobi

Prodigy 155 points

0 Ralph Jacobi over 7 years ago in reply to deathrider

TI__Guru*** 135355 points

Hello Chethan,

You can use CCS, we are just saying you need to use TivaWare. Please download it from http://www.ti.com/tool/SW-TM4C and begin learning with it.

We will not support Direct Register programming like what you are trying to do, so please utilize TivaWare as you will find it much easier to learn and develop with.

0 deathrider over 7 years ago in reply to Ralph Jacobi

Prodigy 155 points

thank you it looks easy to learn than wt i'm doing

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TM4C1294NCPDT: Using switches in Tiva Launchpad