• State Answer Suggested
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 29 subscribers
  • Views 221 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

No part number

Hareesh s
Prodigy 10 points

What configuration i have to do for flashing the Hex file from my computer.

with using IAR embedded workbench software

device : STM85903K3

Tell me the procedure

Debegger : Am using ST-link debegger to flash

  • 0
    Prodigy 5 points
    Hello Hareesh,
    Thank you for joining TI's E2E Forum.

    The 'device' you mention is from ST and I believe is STM8S903K3.
    And you are using the ST-link debugger.
    I suggest contacting STMicroelectronics.

    TI does not support these nor manufacture anything similar.
    Therefore our engineers would not be able to assist.

    Perhaps another E2E community member may have some ideas.

    The manufacturer of your computer should also be able to assist.