EK-TM4C1294XL: TCP Stack Initialization with FreeRTOS for TivaTM$C1294XL

Rajesh Kumar V

Part Number: EK-TM4C1294XL

Hi,

I am looking for a FreeRTOS port on Tiva TM4C1294 launch pad to run a socket client application for our product.
The latest FreeRTOS doesn't have any support for Tiva C Series microcontrollers. We are using TI's CCS IDE for
development purpose. I am planning to make the Nerwork Interface layer for TCP with Tiva TM4C1294. Please guide us
on getting any source code of Netwok interface layer APIs that may be helpful to minimise my effort?

Thanks in advance

Rajesh

over 6 years ago

0 Bob Crosby over 6 years ago

TI__Guru 72500 points

If you only want FreeRTOS, look at https://www.freertos.org/ for information on doing a port. TI also offers an microcontroller RTOS free to use on the TM4C. See: processors.wiki.ti.com/.../TI-RTOS

0 Rajesh Kumar V over 6 years ago in reply to Bob Crosby

Prodigy 30 points

Thanks Bob,
I already have ported FreeRTOS with Tiva TM4C1294 and now looking for network support. Following the instruction, my understanding is to make a buils a NetworkInterface Layer for availing low level driver access. More over I am planning to use lwIP for TCP stack.My expectation is any kind of support for creating network interface calls as suggested in FreeRTOS-Plus-TCP?
Regards
Rajesh

Arm-based microcontrollers

Arm-based microcontrollers forum

EK-TM4C1294XL: TCP Stack Initialization with FreeRTOS for TivaTM$C1294XL