RTOS/TM4C1294NCPDT: Open/Close DHCP client in runtime

Allen_Tseng

Intellectual 420 points

Part Number: TM4C1294NCPDT

Tool/software: TI-RTOS

Hello

I need to Open/Close DHCP client in runtime.

When DHCP closed, I need to set static IP address.

I'm a freshmen in rtos.

Please tell me how to do.

Thanks you very much.

over 6 years ago

0 Charles Tsai over 6 years ago

TI__Guru**** 190806 points

Hi,
I hope you will find the below post helpful.

e2e.ti.com/.../1567909

0 Allen_Tseng over 6 years ago in reply to Charles Tsai

Intellectual 420 points

Hi Charles
Thank for your response.
I will try this, thank you!

Allen

0 Allen_Tseng over 6 years ago in reply to Charles Tsai

Intellectual 420 points

Hi Charles
I tried that post method, but occur this "Semaphore_pend(ipBlockingSem, BIOS_WAIT_FOREVER);".(ipBlockingSem is undefined)
Is ipBlockingSem a user defined or which header file I need to include?

Thank you very much
Allen

0 Charles Tsai over 6 years ago in reply to Allen_Tseng

TI__Guru**** 190806 points

Hi,
Please refer to the below TI-RTOS materials for details.
www.ti.com/.../spruex3u.pdf
training.ti.com/.../TI_RTOS_Kernel_Workshop_Student_Guide_rev4.00.pdf.

The ipBlockingSem is user-defined handler.

0 Allen_Tseng over 6 years ago in reply to Charles Tsai

Intellectual 420 points

Hi Charles
Thanks for your response.
My question is resolved.

Thank you very much
Allen

Arm-based microcontrollers

Arm-based microcontrollers forum

RTOS/TM4C1294NCPDT: Open/Close DHCP client in runtime