RTOS/TM4C1294NCPDT: Using TI-RTOS from custom path

Harshel

Intellectual 955 points

Part Number: TM4C1294NCPDT

Tool/software: TI-RTOS

Hi,

I am developing an embedded application on TM4C1294NCPDT using TI-RTOS V2.16. Compiler CCS v6.2.

I want to use TI-RTOS from custom path.

How can I make configuration in CCS to use custom path for TI-RTOS and TIVAWARE drivers ?

Regards,

Harshal

over 7 years ago

0 ToddMullanix over 7 years ago

TI__Guru* 96960 points

Hi Harshal,

What do you mean by "I want to use TI-RTOS from custom path."?

Todd

0 Harshel over 7 years ago in reply to ToddMullanix

Intellectual 955 points

I have installed CCS in "C:/ti" directory.

And TI-RTOS at directory: C:/Project/TI_RTOS using TI-RTOS installer.

0 ToddMullanix over 7 years ago in reply to Harshel

TI__Guru* 96960 points

Hi Harshal,

In Window->Preferences->Code Composer Studio->Products, add the directory where TI-RTOS is installed. Make sure that directory does not have spaces, dashes, or "special" characters. After you add the directory, you may have to rediscover (and restart CCS as directed).

Arm-based microcontrollers

Arm-based microcontrollers forum

RTOS/TM4C1294NCPDT: Using TI-RTOS from custom path