CCS/TMS570LS0432: Programming in TMS570LS0432 without USB

GUNIT SINGH

Intellectual 690 points

Part Number: TMS570LS0432

Tool/software: Code Composer Studio

Dear All,

I need to program my microcontroller (TMS570LS0432) without using USB?

On the internet, I found various ways of programming the AVR using JTAG, Debug wire, ISP, and SPI?

Can I use those methods for TMS series of microcontrollers also? If yes then please let me know.

Regards,

Gunit

over 7 years ago

0 Miro over 7 years ago

TI__Mastermind 21425 points

Hello,
You can use JTAG to program Hercules MCUs.
If you intent to use bootloader then after uploading it to MCU using JTAG, you can use SPI/CAN/UART (depends on bootloader) to upload program.
Useful information could be found here:
training.ti.com/hercules-how-tutorial-selecting-jtag-emulator
processors.wiki.ti.com/.../JTAG_Emulator_Options_for_Hercules
processors.wiki.ti.com/.../TMS570_Hercules_MCU_Bootloader

Best regards,
Miro

0 GUNIT SINGH over 7 years ago in reply to Miro

Intellectual 690 points

Thanks Miroslav for quick reply.

Actually I am designing a product using TMS 570 so for final product what will be the good option to load my code to MCU bootloader or JTAG?

Also, I understood the concept of Programming MCU using JTAG but is there any video which shows how to program TMS 570 using bootloader?

Regards,
Gunit

0 Miro over 7 years ago in reply to GUNIT SINGH

TI__Mastermind 21425 points

Hello,
Here is description how to communicate with the Hercules UART bootloader: http://www.ti.com/lit/an/spna192/spna192.pdf

Best regards,
Miro

0 GUNIT SINGH over 7 years ago in reply to Miro

Intellectual 690 points

Hi I think you have forgot to attach the file.

Regards,
Gunit

0 Miro over 7 years ago in reply to GUNIT SINGH

TI__Mastermind 21425 points

Hello,
Here it is: www.ti.com/.../spna192.pdf

Best regards,
Miro

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/TMS570LS0432: Programming in TMS570LS0432 without USB