TMS570LS3137: DIEIDL_REG2 not found

_MM_

Expert 1995 points

Part Number: TMS570LS3137

Hello,

The TRM describes the Die Identification Register, Lower Word at 0xF8 offset, but by debugging I find only DIEIDH_REG2 at that address. Where's the DIEIDL_REG2 ?

Thanks ahead.#

Regards,

over 6 years ago

0 Miro over 6 years ago

TI__Mastermind 21425 points

Hello Marco,
According to TRM, at 0xF8 is DIEIDL_REG2 which contains DIEIDL2 [64-95].
DIEIDH2 [127-96] is in DIEIDH_REG3 at addr 0xFC. There is no DIEIDH_REG2 register.

Best regards,
Miro

0 _MM_ over 6 years ago in reply to Miro

Expert 1995 points

Hi Miro,

Thanks for the reply.

There is no DIEIDH_REG2 register.

So, it would mean that CCS is getting a bad decoding, because I am watching the DIEIDH_REG2 right now. Please, look at the screenshot below. Thanks.

0 Miro over 6 years ago in reply to _MM_

TI__Mastermind 21425 points

Hello Marco,
I'll check about this discrepancy.

Best regards,
Miro

0 Miro over 6 years ago in reply to Miro

TI__Mastermind 21425 points

Hello Marco,
This is a typo and the next CCS update should correct this!

Best regards,
Miro

0 _MM_ over 6 years ago in reply to Miro

Expert 1995 points

Hi Miro,

Thanks for the useful info.

Regards,

Marco

Arm-based microcontrollers

Arm-based microcontrollers forum

TMS570LS3137: DIEIDL_REG2 not found