• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 371 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

EK-TM4C123GXL: Initiating ADC Conversion and storing converted data

Soumyadeb Bhattacharjee
Intellectual 510 points

Part Number: EK-TM4C123GXL

Respected Sir/Madam,

I am new to embedded systems. Can you guide me how can I inititate the ADC Conversion using Timer Interrupt and store the converted data using the ADC Interrupts. I would be obliged if I could get some sample code for this.

  • 0
    TI__Guru*** 135355 points
    Hello Soumyadeb,

    We have already been guiding you on this matter in this thread: e2e.ti.com/.../2796708

    We do not have an example project for what you are looking for, but provide plenty of collateral and offered you sufficient advice in that thread. Our customers have always been able to take such offerings and make their solutions work. If you run into specific challenges in implementation then seek clarity with us, but we have offered plenty of advice to get you started.