• State TI Thinks Resolved
  • Locked Locked
  • Replies 1 reply
  • Answers 1 answer
  • Subscribers 31 subscribers
  • Views 343 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Original question:

TM4C129ENCPDT: Debug Female Connector

TM4C129ENCPDT: Simple Program for custom board

Nishitha Chandrasekar
Intellectual 700 points

Part Number: TM4C129ENCPDT
Other Parts Discussed in Thread: EK-TM4C129EXL

Hi Sir,

While using the EK-TM4C129EXL as a programming and debugging for my custom board. What are all the main thing i need to do first for flash the test code 

  • 0
    TI__Guru*** 135355 points
    Hello Nishitha,

    That is a pretty broad query, I am not really sure what to start on advice to offer so let me know more details if this isn't helpful

    I would say as far as programming goes, making sure JTAG works and you can flash a simple application to blink an LED (if present) or toggle a GPIO you can measure with an oscilloscope would be a good start.

    As you test whether JTAG interface is working correctly, you can also refer to this document for methods of verifying your schematic and the JTAG connection integrity (see Section 6 for such details): www.ti.com/.../spma075.pdf