CCS/CC430F5137: Is there any method to flash CC430F5137 with increased number at certain flash address with TI's Uniflash_4.6.0?

user5813940

Part Number: CC430F5137
Other Parts Discussed in Thread: UNIFLASH, MSP-GANG

Tool/software: Code Composer Studio

We are using CC430F5137 for our design and we are using Uniflash_4.6.0 as the flashing tool.

And we need flashing at a certain address of CC430F5137 with an increased number after flashing per piece of CC430F5137.

Is there any way to achieve such goal?

Thank you!

over 6 years ago

0 Peter Spevak over 6 years ago

TI__Genius 17960 points

Hello,
unfortunately this kind of feature is not supported by UniFLASH, as this would require updating the image with each programming cycle.

Best regards
Peter

0 user5813940 over 6 years ago in reply to Peter Spevak

Intellectual 675 points

Thank you, Does TI have some plan to update UniFLASH? I know many IC companies support this feature. It is very useful for the production in practice.

0 Peter Spevak over 6 years ago in reply to user5813940

TI__Genius 17960 points

Hello,
you're right. The serialization is an important feature. We're supporting this feature for the MSP430 with the production programmer from TI called Gang Programmer MSP-GANG www.ti.com/.../msp-gang
Potentially we will integrate this feature in UniFLASH too at some point of time, but currently there is no schedule for this.

Best regards
Peter

0 Peter Spevak over 6 years ago in reply to Peter Spevak

TI__Genius 17960 points

Hello,
I assume this answered your question. In case you need further support on this, please let us know.

Best regards
Peter

Arm-based microcontrollers

Arm-based microcontrollers forum

CCS/CC430F5137: Is there any method to flash CC430F5137 with increased number at certain flash address with TI's Uniflash_4.6.0?