TMS570LS1224: N2HET and HWAG training

user3932933

Part Number: TMS570LS1224
Other Parts Discussed in Thread: HALCOGEN

Dear all:

8years ago, I have meet the TMS470, HET is attact me, and also it is my first time know HET.

but later I leave former company, I never use TMS chips. Now I am come back.

At that time HET is not so complex. now after read the spec, N2HET is too complex, is there any training vidio for HWAG or N2HET?

Best Regards

Fred Cao

over 6 years ago

0 Miro over 6 years ago

TI__Mastermind 21425 points

Hello,
In device TRM, Chapter 23, you can find information needed: www.ti.com/.../spnu515c.pdf
From here you can download HET IDE and its user guide: http://www.ti.com/tool/het_ide
May be this page will be useful too: processors.wiki.ti.com/.../HET_IDE

Best regards,
Miro

0 user3932933 over 6 years ago in reply to Miro

Intellectual 290 points

Dear Miroslav:

AT chapt: 23.2.5.12 Pulse Measurement Example (in HR Mode)

There is no program. Do you have the program?

Best Regards

Fred Cao

0 Miro over 6 years ago in reply to user3932933

TI__Mastermind 21425 points

Hello,
After installing HET IDE, under Tools->Algorithm Library menu you will find few simple examples.
For capturing signals you can use HALCoGen generated functions in het.c as well.

Best regards,
Miro

0 user3932933 over 6 years ago in reply to Miro

Intellectual 290 points

Hello Miroslav:

Thanks a lot, as a fresh guy, I have to disturb you for a simple question.

I got a HET program, and I use HET IDE to debug this program.

From the first sentence. data 5 will be transfered to Register T.

Actually I would like to see the register T's value, but from the HET IDE, I not find any register View, would you kindly tell me where could i find it?