• State Resolved
  • Locked Locked
  • Replies 1 reply
  • Subscribers 30 subscribers
  • Views 296 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

TMS570LS3137: On TMS570LS3137 how to switch Controller to single cycle mode / Pipeline mode

BarematalProgrammer
Expert 1715 points
Part Number: TMS570LS3137

On TMS570LS3137 how to switch Controller to single cycle mode / Pipeline mode

  • 0
    TI__Mastermind 21425 points
    Hello,
    Flash is in Standard mode by default. To change it to Pipeline mode you should set ENPIPE bit of FRDCNTL register.
    SRAM itself is single-cycle read/write accesses in byte, halfword, and word modes.

    Best regards,
    Miro