• State TI Thinks Resolved
  • Locked Locked
  • Replies 2 replies
  • Answers 2 answers
  • Subscribers 31 subscribers
  • Views 222 views
  • Users 0 members are here
Support feedback
Options
Options
Related

This thread has been locked.

If you have a related question, please click the "Ask a related question" button in the top right corner. The newly created question will be automatically linked to this question.

Programming software for TM4E129BNCZADI3

user6017090
Prodigy 15 points

Hi 

We can't find the programming tool for TM4E129BNCZADI3 on TI website, and we have two .out type code file needs to be programmed into this chip.

So could anybody can provide the GUI for TM4E129BNCZADI3 ? Thanks.

  • 0
    TI__Guru**** 191186 points
    Hi,
    The TM4E is a custom part. I think what you are looking for is the target configuration file for your specific device. Once you have the correct configuration file and the GEL script you should be able to use the CCS to program the part. Please send me a private message via E2E by requesting me as a friend. I will send you the target configuration file privately. I will close the thread here. We will communicate via private message.
  • 0
    TI__Guru 72500 points
    This part is not publicly available. Information is limited to companies with a current non-disclosure agreement. Please send me a private message and provide me a company e-mail address so that we may continue this discussion off-line.