TM4C1290NCPDT: TM4C129 - Programmer for production

Sunset

Genius 13755 points

Part Number: TM4C1290NCPDT
Other Parts Discussed in Thread: UNIFLASH

Hello Team,

can you recommend a programmer that can be used for production and supports TM4C129 Family?

Thanks,

SunSet

over 6 years ago

0 Charles Tsai over 6 years ago

TI__Guru**** 183476 points

Hi,
If you are looking for a standalone programmer you can use the Uniflash. Uniflash can be used in both GUI or command line modes. Please see below Uniflash wiki page.
processors.wiki.ti.com/.../UniFlash_v4_Quick_Guide

0 Sunset over 6 years ago in reply to Charles Tsai

TI__Genius 13755 points

Hello Charles,
thanks for your feedback. What I meant is from the hardware side.
So the JTAG programmer that can be used for production.

Probably if it is supported by Uniflash even better.
Other vendors good as well.

Thanks,

SunSet

0 Charles Tsai over 6 years ago in reply to Sunset

TI__Guru**** 183476 points

Hi Sunset,

If you are looking for the supported debug probes then please find below ranging from J-Link to several TI XDS debug probes.

Arm-based microcontrollers

Arm-based microcontrollers forum

TM4C1290NCPDT: TM4C129 - Programmer for production