TIDM-TMS570BMS: Host PC connection issue

Radhika Ballal

Part Number: TIDM-TMS570BMS

I made the changes as per your suggestions, but how do I check that my NHET is working properly. Also , Even now when I connect the TMS570 to the host PC, the BQ76PL455a GUI still shows "the COMP port cannot open". Please guide me in this regard.

over 5 years ago

0 Miro over 5 years ago

TI__Mastermind 21425 points

Hello,
Check whether this link is helpful for you: e2e.ti.com/.../2752400

Best regards,
Miro

0 Radhika Ballal over 5 years ago in reply to Miro

Prodigy 190 points

Yes, I went through this thread. But this couldn't help me much.

In another thread it is mentioned, that it is necessary to connect the cells to make the GUI work with EM1402 after doing the appropriate connections.

I will try connecting with the cells once and will update you.

0 Miro over 5 years ago in reply to Radhika Ballal

TI__Mastermind 21425 points

Hello,
I am going to close this thread for now. When you have any feedback, just write to the end and the thread will be reopened. You can open new thread as well.

Best regards,
Miro

Arm-based microcontrollers

Arm-based microcontrollers forum

TIDM-TMS570BMS: Host PC connection issue